This 85-265V AC LED Dimmer Switch allows us to control the brightness of any LED elements that can accept 1-100% dimming, as is with the products that can be found in the ‘accessories’ sections.
This LED Dimmer allows us to create welcoming environments whilst also allowing us to have well-lit areas, all with a single spin of the dimmer or the single press of a button on the infrared-sensor remote control that’s included (10-15 metre range). Said remote control allows us to raise or lower brightness and also assign turn-OFF times.
In order to dim our LED Filament Bulbs, this type of Triac LED Dimmer Switch is required.
*Recessed Installation.
*Capable of powering up to approximately 200W in total.
*This switch cuts the Sine wave at the end, that’s why this is a ‘Trailing-Edge’ Dimmer.
200W Triac LED Dimmer with an IR Remote Control
This 85-265V AC LED Dimmer Switch allows us to control the brightness of any LED elements that can accept 1-100% dimming, as is with the products that can be found in the ‘accessories’ sections.
This LED Dimmer allows us to create welcoming environments whilst also allowing us to have well-lit areas, all with a single spin of the dimmer or the single press of a button on the infrared-sensor remote control that’s included (10-15 metre range).

£29.95
Available
Power | 200W |
---|---|
Voltage | 85-265V AC |
Material | PCB |
Dimensions | 85x85x41 mm |
IP Rating | IP25 |
Warranty | 5 Years |
Reviews
There are no reviews yet.