8m LED Strip, 220V AC, SMD5050, 60 LED/m

This LED Strip has IP65 Protection and Epistar SMD5050 LEDs that use only 10W for every metre.

tag 512

£31.68

Available

LED Colour Guide

Ledlam led colour temperatures 800px 2018 07

This LED Strip has IP65 Protection and Epistar SMD5050 LEDs that use only 10W for every metre. This type of flexible LED strip can be connected directly to a 220V network using a rectifier cable.
This product is supplied with a corresponding rectifier and end cap. For perfect IP65 Protection, the user must make sure that these areas are protected. If an RGB colour is chosen, it will be supplied with an RGB rectifier.
Perfect for lighting facades, roofs, residences, theatres, showcases, etc. It can also be used for marking off stairs and hallways.
For dimming, a Triac LED Dimmer Switch is required.
Wavelengths:

         Red:      620-625 nm
         Blue:     467-470 nm
         Green:   570-575 nm
         Violet:    380-450 nm
         Yellow:   580-595 nm
         Orange: 595-600 nm
 
* Note: For strips over 10 metres, consult our customer service.
* 220V LED Strips can be cut per metre, only along the marked section.
*If the rectifier cables are out of stock, the item cannot ship.
*Exclusively for Indoors.

Light Source

Epistar-SMD5050

Power

80W

Lumens

840 lm/m

Voltage

AC 220-240V

Beam Angle

120 degree

Material

Silicone/PCB/Epoxy

Dimensions

14x7mm / 16x8mm (RGB)

Lifespan

30,000h

IP Rating

IP65

Warranty

5 Years

Reviews

There are no reviews yet.

Be the first to review “8m LED Strip, 220V AC, SMD5050, 60 LED/m”

LED Colour Guide

Ledlam led colour temperatures 800px 2018 07